|
|
 |
|
Assembly of Subsystem 1:
The Vehicle Frame
 |
|
- Step One
PURPOSE: To measure, cut, de-burr, and dry assemble the vehicle frame.
- Step Two
PURPOSE: To create the H-beam float supports.
- Step Three
PURPOSE: To drill elbows to allow water to fill the vehicle frame.
- Step Four
PURPOSE: To create clearance holes and screw threads for the final assembly of the float supports.
- Step Five
Part 1: Motor Mounts
PURPOSE: To fit and to mount the motor mounts.
Part 2: Gluing and Customizing
PURPOSE: To glue and customize the vehicle frame.
Part 3: Payload Netting
PURPOSE: To cut & fasten the payload netting to vehicle frame.
|
|
|
|