The Vehicle Frame
Step 4

MATERIALS: Vehicle frame 3 Motor Mounts 6 #6x 1/2" Screws Washers TOOLS: Marker Phillips Screwdriver Drill 3/32" drill bit

Figure 5: Motor mount placement.

1. Hold motor mounts against frame in locations shown in Figure 5.
2. Mark vehicle frame through holes in motor mounts.
3. Take 3/32" drill bit, and drill holes through the marks on the frame.
4. Place washers over the holes in the motor mounts, and place a screw through each washer and motor mount hole into hole in vehicle frame.
5. Using the screwdriver, loosely attach motor mounts to the frame. (Don't over-tighten and strip plastic).