|
|
 |
|
The Control Box
Step
5
PURPOSE:
Finishing the control box
MATERIALS:
- Control box
- Wired switches
TOOLS:
- 5/16" nut driver
- Phillips screwdriver
|
|
PROCEDURE:
- Place pole switches in corresponding holes. Tighten
into place with nut driver. (Fig 22A)
- Remove red buttons from button switches. Place button
switches through the two holes next to the tether cable.
Tighten with nut driver. Place red buttons back onto the
switches.
- Screw on the back of the control box. (Fig 22C)
| |
|
|
 |
|
 |
A. Control box with power cable, tether and pole switches
|
|
B. Control box with completed thruster switches |
 |
|
|
| C. Completed control box |
|
|
|
|
|